Polyweave for roll up wall


Polyweave reinforced greenhouse film

Redpath Polyweave is constructed from a commercial grade of woven UV stabilised polythene translucent “fabric” with nominal 82% light transmision. Polyweave is a three layer laminated product with the Centre woven mesh providing a high strength tear resistant.

Polyweave will resist cutting from physical damage or flying debris, but even if it is damaged it is difficult to tear or rip further.

Polyweave is used on Redpaths roll-up-wall side vents, and will often be used for lean-to’s, doors, covering pergolas, or for covering homemade timber framed structures that require a durable and easy to fit cladding.  Polyweave reinforced greenhouse film may be nailed, battened, stapled or strapped in place to the frame. Polyweave may also be sewn or have zippers installed.

Redpath Lockstrip or Duralock film holding system (see here) may also be used.

Polyweave is supplied in two standard widths 2.7m and 4m wide. Polyweave is ‘cut to length’ from these two widths. Increments of 1m, 2m or 5m for longer cut to length rolls.
See below for buying options; firstly select the width required then the length from the drop down button.

Longer lengths are available. Contact us for a price.

REMEMBER: The size of your film will need to be slightly larger than the dimensions of your structure!

Polyweave widths available

Polyweave reinforced greenhouse film
Polyweave 2.7m width
reinforced greenhouse film redpath
Polyweave 4m width

Related links

Check Redpath Instagram