LOCKSTRIP SINGLE

LOCKSTRIP TWIN BASE

LOCKSTRIP SINGLE

5000SQM NZ PLANT

Lockstrip Film Clipping Systems

Lockstrip film clipping system:

The original Redpath clipping system has been used in the industry for nearly 40 years throughout Australasia.
Lockstrip is made up of three parts:
(1)  The aluminium base is available in single-groove or twin-groove versions at 4.5m lengths.
(2)  The insert strip 1.5m length  is available in In long leg for up to 350 micron claddings ,and shortleg for over 350 microns
(3)  Lockstrip clips – are small L shaped clip placed every 150mm along the system to secure the insert

You can purchase all parts separately by using the drop down arrow below.

Lockstrip is a slightly more complex and expensive clip system to use compared to the new type Duralock2 ( see above).
Lockstrip is a “self-locking” design that tightens as the wind load on the cladding increases.

* Installation instructions: (see related links below for YouTube video)

 

Redpath Fasteners