Environment Control
Aktiva environmental control system
Redpath offer a range of dedicated environmental controllers for the close monitoring and adjustment of the internal environment on both horticultural and agricultural buildings. Accuracy of the internal environment will offer superior production and protection from temperature/humidity fluctuations.
In standard form the Redpath Aktiva will typically monitor internal temperature, external wind speed, external wind direction + rainfall. The controller will open/close the buildings natural ventilation system to maintain the operators pre-set desired temperature.
The controller will also operate additional equipment with the optional sensors for Humidity, Heating, Stirrer Fans, Extraction Fan & Wet wall systems + Fogging, Shade/Thermal screens, and solar sensing.
Further benefits of the new Redpath Aktiva controller are the ability to monitor your controller via your PC, tablet or smart phone and the new touch screen makes programming an ease.
Use the enquiry form below – and Redpath can submit an environmental controller solution for your needs.
Aktiva controller Basics
- Climate control for one environment (others may be added as an option)
- Solar sensing
- Wind speed sensing
- Wind direction sensing
- Rain sensing
- Heater operation
- Alarm functions
- Humidity control function
- Fan & Fogging function
Autowinder sidewall roll-up-wall controller
The Autowinder controller is a digital electronic controller that will open/close roll up wall blinds (that use the Autowinder-motors. (see below)
The controller will operate two 48m maximum length motor-drives directly or it can open more motors if the “24 volt power box” is fitted alongside the additional units.
The Autowinder electronic controller has a digital display and is simple to programme with settings for your maximum and minimum desired internal temperatures. The controller is supplied with an instruction sheet for setting it up and utilises a 240volt / single phase power input supply with a 24volt DC output.
Note: Always use a qualified electrician to connect and appropriate RCD protection to suit individual application.
Use the enquiry form below, and provide us with your particular roll up wall ventilation controller needs.
Related links