Automatic misting watering units
Balance arm evaporative misting unit, will water or mist your plants automatically
How it works:
The gauze balance arm pad can be set with an adjustable counter weight on one end of the arm to your appropriate misting sensitivity. When the unit is switched on the mercury switch on the balance arm will allow power to the solenoid and the watering process is begun. As the balance arm gauze pad collects water droplets, the weight of the water “tips the scale” and switches off the solenoid. Over time the water will evaporate from the gauze pad and the counter weight will tip down and switch the watering system back on again.
This process repeats indefinitely and is self-adjusting in respect that the warmer and drier the conditions, the faster the evaporative process takes and therefore the more frequent the misting will occur.
Parts the customer needs to supply:
15mm PVC pipework / connectors as desired
The system is supplied with three misting heads - however more or less of these may be run as desired (dependent on available water pressure).
Covers approximately an area of 2.4m2 with the 3 nozzles supplied